Canon PIXMA MX700 Series Quick Start Manual page 23

2
Load the envelopes.
(1) Retract the Paper Support.
Important
Envelopes may not be fed properly if the
Paper Support is extended.
(2) Load the envelope against the Cover Guide
(the right side of the Paper Support).
Load with the address side facing UP and the
rear flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
Note
Make sure that the Cover Guide is set upright.
(3) Slide the Paper Guide against the left side of the envelope.
(4) Press the Feed Switch button so that the Rear Tray lamp (C) lights up.
3
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 32 or "Printing with
Macintosh" on page 33.
(3)
(C) (4)
(A) Printing orientation
(B) Make sure the flaps are folded.
Before Using the Machine
(1) (B)
(2)
(A)
19