Aligning The Print Head - Canon G4200 Online Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
Refill any ink tanks
You need to prepare: a single sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1. Make sure that the power is turned on.
2. Load a single sheet of A4 or Letter-sized plain paper in the rear tray.
After loading paper on the rear tray, the paper information registration screen appears on the LCD.
Select A4 or Letter for Size: and Plain paper for Type: and then press the OK button.
3. Pull out the paper output tray, then open the output tray extension.
4. Press the Setup button, use the
button.
LCD and Operation Panel
button to select Head alignment and then press the OK button.
5. Use the
The print head alignment sheet will be printed.
that are low.
button to select Maintenance, and press the OK
69