Table of Contents
Advertisement
3.4
System Menu
Push the System (
) key to view and adjust instrument settings. Highlight a sub-menu then push the
menu options.
Pre-defined or user-selected options are noted within brackets ( [ ] ).
1
2
3
4
5
6
7
8
9
10
11
12
13
Operation
1 Set the Date and Time
2 Change the user-defined Calibration Options
3 Change the instrument Language settings
4 Change the Radix Point
5 Change the Logging options
6 Change the Sampling options
7 Set the handheld Auto-Shutoff time
8 Set the Backlight mode
9 View the Software Version
10 View the handheld Serial Number
11 View and adjust the Unit ID
12 View the Sensor specific information
13 Adjust the display Brightness
Date/Time
→
Date/Time
For accurate logging and calibration data, correctly set the date and time options.
Select any of the following options to set the Date/Time.
Date/Time options:
• Set YY/MM/DD, MM/DD/YY, DD/MM/YY or YY/DD/MM date format
• Set the correct date
• Select 12 or 24 hour time format
• Set the correct time
20
ENTER
key to view the sub-
Advertisement
Table of Contents
