Table of Contents
Advertisement
1.1
ProSwap Logger Overview
The ProSwap Logger is a multiparameter instrument that collects water quality data. The sonde collects the data with a single user-
replaceable sensor, plus an integral temperature sensor and pressure transducer. Each sensor measures its parameter via a variety
of electrochemical, optical, or physical detection methods. The 1-port bulkhead accepts any ProDSS sensor and automatically
recognizes its type. Depending upon user-defined settings, the ProSwap Logger will collect data and store it onboard the sonde,
transfer the data to a data collection platform (DCP), or relay data to the ProSwap/ProDSS Handheld or a PC using Kor Software.
See
Section 6
for information specific to vented level sondes.
Users communicate with the ProSwap Logger via the ProSwap or ProDSS Handhelds or via Kor Software with a USB communications
adapter to a PC.
Specifications
Material
Internal Logging
Memory Capacity
Sample Rate
Software
Communications
Sonde
Adapters
Power
External
Powering
Charging
Internal
1
Temperature
Operating
Storage
Depth Rating
Battery Life
1
Dimensions
3
Diameter
Length
w/ Battery
w/o Battery
Weight
w/ Battery
w/o Battery
Warranty
Introduction
Titanium
512 MB, > 100,000 data sets
Up to 1 Hz
Kor Software
YSIP, SDI-12
USB, Flying Lead
5.4-16 V
9-16 V
Rechargeable Li-Ion battery
-5 to 50°C
-20 to + 80°C
Up to 100 m
≥ 90 days
2
2.65 cm,1.045 in
57.35 cm, 22.57 in
49.70 cm, 19.57 in
0.57 kg, 1.26 lb
0.45 kg, 0.99 lb
2 years
¹ Internal battery only available on select models.
² Battery life based on CT sensor at 15 min logging; this will vary depending
on the type of sensor and logging frequency.
Sonde only; does not account for integral cable. Total weight will depend
3
on cable length.
5
O 2.65 cm
O 2.54 cm
Advertisement
Table of Contents
