Table of Contents
Advertisement
3.2
Handheld Startup and Navigation
Startup
Push the Power On/Off (
Push and hold the key for 1.5 seconds to turn the handheld off.
Navigation
The handheld contains menus to change user-defined options, functions, and parameters. Use the Up/Down Arrow (
to highlight different options within menus and sub-menus, then push the Enter (
(
) key to return to the previous menu.
Push the Escape (
) key to return to the Run screen. To enable or disable an option, highlight the option, then push the
Esc
key. Enabled functions appear as a circle with a dot (
(
) or an empty box (
Alpha/Numeric Entry
When required, an alpha/numeric entry screen will be shown. Use the arrow keys to highlight a specific character and push the
key to select it for entry. When finished entering information, highlight ENTER, then push the
ENTER
NOTE:
When in an alpha/numeric screen, the
return to the previous menu.
1
2
4
Operation
) key to turn on the handheld. If the handheld does not turn on, make sure that the battery is charged.
).
3
5
) or a box with a check mark (
key is for alpha/numeric navigation only. Push the
17
) key to select the option. Push the Left Arrow
ENTER
). Disabled functions appear as a circle only
key to save the entry.
ENTER
1
1 User entry field
2 Delete entire entry
2
3 Backspace
3
4 Enter (highlighted selection)
5 Upper/lowercase
4
and
) keys
ENTER
key to cancel and
Esc
Advertisement
Table of Contents
