Table of Contents
Advertisement
2.4
Connection to Kor Software
The ProSwap Logger can be connected to a PC running Kor Software via a USB adapter. A ProDIGITAL USB adapter is sold
separately. Alternatively, the software communication may be established through the handheld's USB port.
1.
Download the Kor installer from YSI.com and extract the .zip file, or connect the included USB drive to your PC.
2.
Right click on Start.exe and select "Run as administrator".
3.
In the installation splash screen, select "Install Application" and follow the prompts to install.
4.
After installing Kor, go back to the main installer window and select "Install USB Drivers".
5.
Select "Install All" and follow the prompts to install.
6.
Connect the PSL to a USB Adapter or handheld.
7.
Connect the USB cable to the PC. In Kor, the instrument will show up in the Instrument Connection Panel. Click "Connect".
8.
Go to Instrument Connection Panel, and click "Update Device Firmware" to update the device to the latest version. If the
device is up to date, a message will appear telling you so.
The USB connection provides communication and power to the ProSwap Logger. Loggers with internal battery may be charged
via this connection.
NOTICE:
Be sure that the software is updated to the latest version (1.0.27.3 or newer).
Setup
14
Advertisement
Table of Contents
