Menus In Copy Mode - Canon MultiPASS F30 Reference Manual

Menus in Copy Mode

• Default settings are shown in bold type.
NOTE
SPECIAL COPY*
1.IMAGE REPEAT
VERTICAL
HORIZONTAL
2.MIRROR IMAGE
3.ENTIRE IMAGE
* This menu is available only in the Copy Mode.
PRINTER SETTINGS
1.CLEANING
1.NOZZLE CHECK
2.HEAD CLEANING
3.HEAD REFRESHING
4.ROLLER CLEANING
2.ALIGN PRINT HEAD
VERT LINE PATTRN
CHANGE V VALUE
LAT LINE PATTERN
CHANGE L VALUE
3.BOTTOM MARGIN
7-2
Name
Prints multiple copies of an image on a single
sheet. (→ p. 4-5)
Selects the number of vertical repetitions.
Selects the number of horizontal repetitions.
Prints a mirror image of the original. (→ p. 4-7)
Prints the original image to fit the selected paper
size. (→ p. 4-8)
Name
Selects a cleaning function.
Prints the nozzle check pattern to see if the print
head nozzles are operating properly. (→ p. 5-8)
Performs normal printhead cleaning. (→ p. 5-8)
Performs deep printhead cleaning. (→ p. 5-8)
Performs roller cleaning. (→ p. 5-3)
Aligns the vertical and lateral print position of
the printhead. (→ Quick Start Guide)
Prints the vertical line pattern.
Selects the pattern you want to use, for A to F.
Prints the lateral line pattern.
Selects the pattern you want to use, for G and H.
Selects the length of the bottom margin for color
copying and color reception.
Description
Description
Setting
—
1/2/3/4
1/2/3/4
—
—
Setting
—
—
—
—
—
—
A, B, C:
-3 to +7 (0)
D, E, F:
-5 to +5 (0)
—
-3 to +3 (0)
NORMAL (5 mm)
LONG (27 mm)