Canon MultiPASS F30 Reference Manual page 43

Message (Error Code)
LOAD PAPER
(PRESS RESUME
KEY)
M INK EMPTY
MEMORY FULL
(#037)
(F50 model only)
WAIT COOLING
WRONG CARTRIDGE
Y INK EMPTY
Cause
The multi-purpose tray is empty.
The Magenta Ink Tank in the Printhead
(Cartridge) is empty.
The machine's memory is full because it
has received too many documents, or a
very long or detailed document.
The machine's memory is full because
you tried to send or copy too many pages
at once, or a very long or detailed
document.
During printing, the printhead may have
become too hot.
The Printhead (Cartridge) isn't installed
correctly.
The Yellow Ink Tank in the Printhead
(Cartridge) is empty.
Action
Load paper in the multi-purpose tray (→
Quick Start Guide). Make sure the stack
is below the paper limit mark (| t ).
Then press Resume.
Replace the Ink Tank. (→ p. 5-6)
Print any documents stored in memory
(→ Fax Guide). Then start again.
Divide the document and send or copy
each part separately. To free up space in
the machine's memory, print or delete
any documents in memory you no longer
need. (→ Fax Guide)
Allow the machine to cool down. The
machine will resume printing when it has
cooled down.
Retry to install the Printhead (Cartridge).
Replace the Ink Tank. (→ p. 5-6)
6
6-5