n
The MultiPASS memory can store up to approximately 42 pages (based on
ITU-T/CCITT No. 1 Chart, standard mode).
You can set the MultiPASS not to store faxes in memory if a problem occurs
during reception. You can only do this through the operation panel. For
more information about setting the MultiPASS to store faxes in memory, see
page 5-24 in the online Standalone Fax Manual.
Once the pages are printed, they are deleted from memory.
If the memory becomes full, you will not be able to receive the remaining
pages. Contact the other party and request that they send the fax again.
Canceling Receiving
Follow this procedure if you want to stop receiving a fax before reception is
completed.
1.
Press
Stop
The MultiPASS asks you to confirm that you want to cancel.
2.
Press
Tone
Receiving is not canceled until you press
If you change your mind and want to continue receiving, press
Chapter 5
.
Stop
CANCEL?
A
A
YES=(
)
T
to cancel receiving.
TX/RX CANCELLED
Ex:
TX/RX NO.
YES #NO
NO=(
#
)
5003
T
.
Receiving Faxes
.
#
5-11