Canon MultiPASS C545 User Manual page 95

Regular dialing
Use the numeric buttons to enter the fax number, then press
number to the broadcast list.
You can only enter one fax number this way.
n
If you enter the wrong destination, press
Function
You must dial the second number within five seconds of dialing the first
number. All subsequent numbers must be dialed within 10 seconds. If you
wait longer than the time-out interval before dialing the next number, the
unit will start scanning the document. You can turn off the time-out interval
using the MultiPASS Fax Setup Utility (the "Auto Start and Send" option) or
the operation panel. If you are using the MultiPASS Fax Setup Utility, see the
online MultiPASS Desktop Manager Software Guide. If you are using the
operation panel, see the online Standalone Fax Manual.
If you want to review the numbers you entered, press
to scroll through the numbers.
u
4. Press
Start / Scan
MultiPASS to begin scanning automatically.
The MultiPASS then scans the document into memory, and begins
sending it to the destinations.
You will see a series of brief messages showing details on the transmission.
To cancel sending, press
Press
canceled. (You cannot cancel only one destination.)
Chapter 4
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
OPER SYMBOLS
0 #
Tone
again, and enter the correct destination.
to begin scanning for sending, or wait a few seconds for the
Start/Scan
Stop
to cancel. Sending to all destinations you specified in step 3 will be
T
Set
, then
Function
Function
. You will be asked to confirm canceling.
Sending Faxes
to add the
Set
. Then press
Clear
and use or
d
4-17