Printing On High Resolution Paper; Using The Paper Output Guides - Canon MultiPASS C545 User Manual

When loading transparencies, insert one sheet of plain paper as the last sheet
in the stack.
Do not leave film in the multi-purpose tray for long periods of time. Dust and
dirt may accumulate on the film resulting in spotty printing.
To avoid smudging caused by fingerprints, use a pair of thin cloth gloves while
loading and handling film.
To avoid fading, do not expose printed film to prolonged sunlight.
Store unused papers and films flat. Do not remove papers from their
protective packaging until you are ready to use them.
Store unused film at temperatures between 59° and 86°F (15° and 30°C). The
relative humidity should be between 10% and 70%.

Printing on High Resolution Paper

To load High Resolution Paper in the MultiPASS, follow the same procedure as for
loading paper in the multi-purpose tray (see page 2-11). However, before printing,
be sure to raise the paper output guides, as described below.
After using a package of High Resolution Paper, be sure to perform the cleaning
operation described on page page 2-18.

Using the Paper Output Guides

When printing on High Resolution Paper or Banner Paper, use the guides on the
paper output tray to help support the printed sheet as it exits the unit. This will
keep the sheet from sagging and pulling through the unit as it exits, which can lead
to poor print quality.
Chapter 2 Paper Handling
2-17