Handling And Safety Information; General Safety Instructions; Specific Instructions; Additional Information - Delta DelREMO-V2.0 User Manual

1

Handling and Safety Information

It should be ensured that trained technicians should only operate the DelREMO-V2.0 system. Operating
personnel are advised to read the manual completely before attempting installation. Delta will not be
responsible for any mishaps occurring due to the ignorance of the safety instructions.
1.1

General Safety Instructions

Following are the safety instructions for operating the DelREMO-V2.0 system: -
•
Equipment racks may have sharp edges. Wearing gloves is recommended.
•
Ensure that the system is connected to DC adapter before operating it.
•
Ensure that all operations concerning the DelREMO-V2.0 system are carried out under trained
supervision. Supervisors, who are capable of providing first aid in case of electric shock, need to be
present at the site.
1.2

Specific Instructions

•
Before operating the system, please ensure basic parameters like environmental conditions,
AC input frequency and voltage, are as per the system specification.
•
Ensure all the AC and DC inputs & outputs are connected to specified MCB's & Connectors.
•
Ensure the temperature sensors are placed at appropriate location where temperature needs to be
monitored.
•
The area is freed of any flammable vapors or fluids. To avoid electrical hazard, the outer covers of all
components including the rectifiers are to be tightly secured.
1.3

Additional Information

•
Delta does not hold any liability for damages resulting from incorrect installation or poor maintenance
of the system.
•
Operation of the equipment beyond its intended purpose could show drastic results.
•
Unauthorized modification of the equipment will void the warranty and it may cause incorrect
operation.
•
The user is responsible for ensuring that the personnel working with the equipment are provided with
appropriate operational and safety training.
•
The user is responsible for ensuring the restricted access of DelREMO-V2.0 system.
•
If the power supply to the DelREMO-V2.0 system is not fitted with a disconnecting switch or
equivalent device, the operator is responsible for fitting an appropriate disconnection switch
conforming to the relevant regulations.
1.4

Contents of the consignment

Following table shows the contents of Consignment.
Table 1.1 Contents of the consignment
Sr. No
1
2
Product
Installation and quick start guide
DelREMO-V2.0 system
Remark
1 PCE
1 PCE
•
6