Delta DelREMO-V2.0 User Manual page 14

•
Move the DelREMO-V2.0 downwards as shown below. Note that slot represented locks
with hooks provided in wall
Step 4:→ System Handling
While opening and closing the top cover of DELREMO system, special attention is required towards LCD
connector, as the top cover may damage LCD's harness while opening and closing.
Step 5:→ Adapter connections
While connecting the adapter output to DelREMO System polarity
of the supply must be checked. The 24 VDC input to system must
WARNING
be connected to input terminal provided only.
Step 6:→ Solar Inverter Modular interconnection procedure
Modular interconnection procedure involves interconnection to various modules of the system on RS 485
daisy chain to make it functional.
MAXIMUM 30 NUMBERS OF SOLAR INVERTER MODULES CAN BE
CONNECTED OVER RS485 DAISY CHAIN OVER 1 PORT. USE PROVIDED
RS485 TERMINAL BLOCK FOR CABLE TERMINATION AT DELREMO
NOTE
SYSTEM. THUS MAXIMUM 60 INVERTERS CAN BE CONNECTED OVER 2
RS485 PORTS.
.
Fig 3.2 DelREMO-V2.0 Wall Mounting Arrangement
•
14