Basic Interconnection Steps - Delta DelREMO-V2.0 User Manual

3.2

Basic interconnection steps

DelREMO-V2.0 involves the following basic interconnection steps. The following connection check list is
done to avoid connection problems.
Serial
no.
1
2
3
4
USE THE WIRING DIAGRAM, SUPPLIED WITH THE INSTALLATION
DOCUMENT, TO ENSURE THAT ALL CABLES HAVE BEEN CONNECTED
CORRECTLY.
NOTE
Steps for input connection
Connect all the sensors output to
DelREMO at their respective position &
provide power from system is required.
Connect inverters over RS485 port,
ACEM.
Connect Digital inputs if required.
Connect 24 VDC Adapter to the unit.
•
Check
15