15
SITE CONFIGURATION:
ENERGY METER
Follow below path by pressing ENTER
MENU→SITE CONFIG→ENERGY METER
By pressing UP or DOWN key you can
change select ENABLE or DISABLE option.
For moving to the other digit press ENTER
key.
Follow step 5 & 6 to save changes
4.1.5 Basic functional verification
After commissioning of DELREMO SYSTEM let's move to basic functional verification. Proceed as
follows:
THIS ENSURES THE COMMISSIONING OF THE SYSTEM. IF FACING ANY
TROUBLE DURING COMMISSIONING REFER TROUBLESHOOTING
NOTE
TABLE.
Serial
no.
1
2
3
4.1.6 Check points before leaving the site
Check following points carefully before leaving the site.
Serial
no.
Basic functional verification
Check the inverter communication on
DelREMO webpage
Check sensors are powered up and
verify their output on DelREMO
webpage
Check the SIM Card registration or and
connectivity of DelREMO to NOC. In
case of Ethernet verify the internet is
active on provided network w/o any
proxy.
Steps for Start up Precautions
•
Check
Check
36