Step 2:→ Preliminary system inspection
Before starting with the installation of the system thoroughly inspect the system for any physical damage
during carriage. Contact the carrier company if any physical damage is noticed. Follow the check list to
inspect the system.
Serial
no.
1
2
3
Step 3:→ System Mounting
DelREMO-V2.0 is fully internally fitted and completely connected at the factory. System mounting and
input/output connections along with necessary connections to various power sources and connections are
made at the installation site. DelREMO-V2.0 is to be mounted on wall
•
At first mark two holes on the wall where system has to be installed using the wall mount plate.
•
Fix the wall mount plate to the wall as shown in image below.
Systems for inspection
Check the unit for any physical damage to
the system.
Check the internal components.
Check for any damage to the LCD.
Fig 3.1 DelREMO-V2.0 Wall Mounting Plate
•
13
Check