Ordering Numbers - Kemppi MTP 350 Operating Manual

• Distance of gun to work piece is too long. In short arc welding keep
the gas nozzle at a distance of 10 - 15 mm and in hot arc welding at a
distance of 15 - 30 mm to work piece.
• Angle of tilt of gun is too big.
• There is too much draught at welding place.

5. ORDERING NUMBERS

Gun
MTP 350
MTP 500
Wear Parts
Contact Tip Cucrzr 0.8mm
Contact Tip Cucrzr 1.0mm
Contact Tip Cucrzr 1.2mm
Contact Tip Cucrzr 1.4mm
Contact Tip Cucrzr 1.6mm
Liners For Steel Wires
Liner 3m 0.6 - 0.8 White
Liner 4.5m 0.6 - 0.8 White
Liner 3m 0.9 - 1.2 Red
Liner 4.5m 0.9 - 1.2 Red
Liner 3m 1.4 - 1.6 Yellow
Liner 4.5m 1.4 - 1.6 Yellow
Liners For Aluminium Wires
DL-Teflon Liner 3m 0.8-1.6
DL-Teflon Liner 4.5m 0.8-1.6
Liners For Stainless Steel Wires
DL-Teflon Liner 3m 0.8-1.0
DL-Teflon Liner 4.5m 0.8-1.0
DL-Teflon Liner 3m 1.2-1.6
DL-Teflon Liner 4.5m 1.2-1.6
Length 3.0 m
6258353
6258503
OPERATING MANUAL
Length 4.5 m
6258354
6258504
9876641
9876643
9876644
9876645
9876646
English
4188571
4188572
4188581
4188582
4188591
4188592
4300840
4300850
4302680
4302690
4302700
4302710
7
EN