Switching To The Registered Af Point - Canon EOS 1D Instructions Manual

Switching to the Registered AF Point

Normally, you press the <
registered AF point. However, with C.Fn-18-1/2 (→p.138), you can just press the <
to switch to the registered AF point. See "Setting a Custom Function" on page 132.
•
If no AF point has been registered, the above steps will switch it to the center AF
point.
•
If you set or cancel C.Fn-13, the center AF point will become the registered AF
point. This does not apply if you change C.Fn-13-1 to C.Fn-13-2 (or vice versa).
The registered AF point will not change in this case.
If C.Fn-18-1/2 and C.Fn-04-1/3 have been set, you can press only the <
to switch to the registered AF point and start autofocusing at the same time.
> button and < > button simultaneously to switch to the
(1)
Press the <
simultaneously.
•
This is the default method with C.Fn-18-0.
(2)
Press only the <
the registered AF point.
C.Fn-18-1
(3) Switch to the registered AF point only
while pressing the <
C.Fn-18-2
•
When the <
the original AF point.
AF Point Registration and Switching
> button and <
> button to switch to
(→138)
> button.
(→138)
> button is released, it will return to
> button
> button
3
> button
69