Mounting And Detaching A Lens; Mounting A Lens; Detaching The Lens - Canon EOS 1D Instructions Manual

Mounting and Detaching a Lens

Mounting a Lens

Lens mount index

Detaching the Lens

•
Since the EOS-1D's image size is smaller than the
normal 35mm film format (see illustration), the EF lens
attached to the camera will have a slight telephoto effect
equivalent to 1.3 times the lens focal length.
•
AF stands for autofocus.
•
MF or M stands for manual focus.
•
Be careful not to lose the lens caps and body cap.
26
Remove the caps.
1
•
Remove the rear lens cap and the body cap by
turning them as shown by the arrow.
Attach the lens.
2
•
Align the red dots on the lens and camera and turn
the lens as shown by the arrow until it snaps in
place.
On the lens, set the focus mode switch
3
to < >.
•
If the focus mode switch is set to <
older lenses), autofocus will not operate.
Remove the front lens cap.
4
While pressing the lens release button,
turn the lens as shown by the arrow.
•
Turn the lens until the red dot is at the top, then
detach the lens.
> (or < > on
EOS-1D's image size
(28.7 x 19.1 mm)
35mm image size
(36 x 24 mm)