Switching To The Registered Af Point - Canon EOS 10D Digital Instruction Manual

Registering and Switching AF Point

Switching to the Registered AF Point

Normally, to switch to the registered AF point, you press the <
simultaneously. However, with C.Fn-13-1/2, you can just press the <
the registered AF point.
If C.Fn-13-1/2 and C.Fn-04-1/3 have been set, you can press only the <
switch to the registered AF point and start autofocusing at the same time.
70
(1) Press the <
simultaneously.
•
This is the default method with C.Fn-13-0.
For the setting procedure, see "Setting Custom Functions"
(→p.145) or see page 69.
(2) Press only the <
the registered AF point.
C.Fn-13-1 (→p.150)
(3) Switch to the registered AF point only
while pressing the <
(→p.150)
C.Fn-13-2
•
When the <
the original AF point.
> button and <
> button to switch to
> button and <
> button to switch to
> button.
> button is released, it will return to
> button
> button
> button to