Canceling Aeb - Canon EOS 1D Instructions Manual

Auto Exposure Bracketing
Standard Decreased Increased
exposure exposure exposure

Canceling AEB

96
Take the pictures.
3
s
The AEB sequence will be standard exposure,
decreased exposure, and increased exposure.
s The viewfinder's exposure level indicator will
indicate the respective bracketing amount as each
shot is taken.
•
In the continuous shooting mode, holding down the
shutter button will take all three bracketed shots
continuously. The shooting will then stop automati-
cally.
•
When AEB is used with the self-timer, the three
bracketed shots will be taken in succession after
the 2- or 10-second self-timer delay.
Canceling shutter speed AEB or aper-
ture AEB
•
While pressing the <
the < > dial to set the AEB amount to "
let go of the <
cancel AEB.
Canceling ISO speed AEB
•
While pressing the <
the < > dial to set the AEB amount to "
let go of the <
cancel AEB.
•
AEB will also be canceled if you change lenses,
replace the CF card, replace the battery, set a bulb
exposure, have a flash-ready Speedlite, press the
< > button, or set the <
•
After canceling ISO speed AEB, set the ISO speed
as necessary. (→p.49)
> and < > buttons, turn
> and < > buttons. This will
> and < > buttons, turn
> and < > buttons. This will
> switch to <
". Then
". Then
>.