MENU
Select the group number.
5
•
While pressing the <
dial to select a group number from "P.Fn-0-1" to
"P.Fn-0-3." Then let go of the <
s
When you select an unregistered group number, the
"Not registered" message will appear. If you select a
registered group number, the Custom Function
settings in that group will be displayed.
Register the Custom Function settings
6
under the selected group number.
•
While pressing the <
dial to select "OK." Then let go of the <
button.
Check the registered group's Custom
7
Function settings.
•
Check the registered Custom Function settings and
press the <
s
The menu in step
•
To register another Custom Function group, repeat
1
7
steps
to
. If you want to change any Custom
Function settings in a group, also repeat steps
7
.
•
Press the <
exit the menu and turn off the LCD monitor, press
the <
> button again.
•
To incorporate the group's Custom Function
settings into the camera, follow "Using a Custom
Function Group" on the next page.
Registering Custom Function Groups
> button, turn the <
> button.
> button, turn the <
> button.
3
will reappear.
> button to return to the menu. To
>
>
>
1
to
8
141