Canon EOS 1D Instructions Manual page 151

•
Be sure not to turn off the camera while cleaning the CCD sensor. If the power is
turned off, the shutter will close and you might damage the shutter curtain with
the blower.
•
Do not use a blower brush. The brush can scratch the CCD sensor.
•
Do not insert the blower tip inside the camera beyond the lens mount. If the
power goes out, the shutter curtain will close and the blower tip may damage it.
•
Do not use a high-pressure blower or compressed, canned air. The air's extra
pressure may damage the CCD sensor or the gas in the can may freeze the CCD
sensor surface.
Clean the CCD sensor.
5
•
Use a rubber blower to carefully blow away any
dust, etc., adhering to the CCD sensor.
After cleaning the CCD sensor.
6
•
Set the < > switch to <
s The camera will turn off and the shutter will close.
The reflex mirror will also go down.
•
Set the < > switch to <
pictures again.
Cleaning the CCD Sensor
MENU
>.
>. You can start taking
9
151