Menu Using A Custom Function Group - Canon EOS 1D Instructions Manual

Setting Custom Function Groups
MENU
Using a Custom Function Group
MENU
After following the procedure on the preceding page to register a Custom Function group,
follow the procedure below to apply the Custom Function group's settings to the camera.
142
On the menu, select "Personal Func-
1
tions (P.Fn)."
•
Press the <
•
While pressing the <
dial to select < >.
•
While pressing the <
dial to select "Personal Functions (P.Fn)." Then let
go of the <
Select "P.Fn 0."
2
•
While pressing the <
dial to select "P.Fn 0."
Select "Apply."
3
•
While pressing the <
dial to select "Apply." Then let go of the <
button.
s
If the P.Fn 0 group has not been registered, "Apply"
cannot be selected. First follow the procedure in
"Set Custom Function Groups." (→p.140)
Select the group number to be applied.
4
•
While pressing the <
dial to select "P.Fn-0-1," "P.Fn-0-2," or "P.Fn-0-3."
Then let go of the <
s When you select a registered group number, the
respective Custom Function settings ("Registered
contents") will be displayed. If you select an
unregistered group number, the "Not registered"
message will appear.
> button.
> button, turn the <
> button, turn the <
> button.
> button, turn the <
> button, turn the <
> button, turn the <
> button.
>
>
>
>
>
>