Image Protection; Protecting A Single Image - Canon EOS 1D Instructions Manual

Image Protection

Protecting a Single Image

This prevents the image from being erased accidentally.
The < > button has dual functions for image protection and sound recording. To
protect an image, press the button and let go when the <
press the <
recording instead and the image protection will not be applied.
•
You can also protect all the images in a folder or in the CF card all at once.
(→p.120)
•
A protected image cannot be erased with the camera. To erase a protected
image, cancel the protection first.
You can also erase all images at once while retaining the protected ones. (→p.123,
125)
Select the image to be protected.
1
•
Press the <
display. (→p.116)
•
The image can be protected regardless of the
display format.
•
While pressing the <
dial to select the image to be protected. Then let go
of the <
Protect the image.
2
•
Press the <
s
The <
image is protected.
•
To cancel the image protection, press the <
button again. The <
•
To protect another image, select the image and
press the <
other images you want to protect.
•
When the image is displayed immediately after
capture, you can follow step
image.
•
To turn off the image display, press the <
button.
> button too long (about 2 seconds), the microphone will start
> button to turn on the image
> button, turn the <
> button.
> button.
> icon will then appear to indicate that the
> icon will turn off.
> button. Repeat this step for all
2
to protect that
> icon appears. If you
>
>
>
7
119