Switching To The Registered Af Point - Canon EOS 1Ds Mark II Instruction Manual

Switching to the Registered AF Point

Normally, you press the <
to switch to the registered AF point. However, with C.Fn-18-1/2 (p.153),
you can just press the <
Set Custom Functions with
¡
If you set or cancel C.Fn-13, the center AF point will become the
registered AF point. This does not apply if you change C.Fn-13-1 to C.Fn-
13-2 or vice versa.
¡
If C.Fn-18-1/2 and C.Fn-04-1/3 are also set, you can just press the <
button to switch to the registered AF point and activate the autofocus at
the same time.
P
> button and <
P
> button to switch to the registered AF point.
3 n
< >.
(1) Press the <
button simultaneously.
¡This is the default method.
(2) Press only the <
switch to the registered AF point.
C.Fn-18-1
(3) Switch to the registered AF point
only while pressing the <
button.
C.Fn-18-2
¡When you release the <
the camera will return to the original
AF point.
S
> button simultaneously
P
> button and <
P
> button to
(p.153)
(p.153)
P
S
>
P
>
> button,
P
>
71