JDS Uniphase HST-3000 Quick Card page 8

13 The link has now been fully tested. In the next section one can download the results to
USB and view them on a laptop to determine if the link passed or failed final
inspection.
5 Downloading Results on the HST-3000 (via USB)
This section describes how to download results via USB from the HST-3000
Step
1
Connect the USB Flash Drive to the HST-3000's USB port on the top of the
mainframe.
2 Press the green Power Key to turn on the HST-3000.
3 Press the System Navigation key, and press
the TOOLS soft key. Press the Up Arrow
or Down Arrow key to select File
Manager, then press the OK key to manage
user files in the file system.
4 Using the OK key, Up Arrow key, and
Down Arrow key, navigate to the desired
file. To go to RFC 2544 results select
results/rfc 2544 folder. Press the Action
Soft key and select Copy to USB. Repeat
step 3 for all desired files.
5 Power cycle the HST-3000 by Pressing the green power button to turn the unit
off.
6 Disconnect the USB Flash Drive from the HST-3000's USB port on the top of
the mainframe and load it onto a PC for analysis
Directions
8