JDS Uniphase HST-3000 Quick Card page 7

7 Tap right to select the Latency. Make sure that
Number of Trials -> 1
Trial Dur. -> 120 sec
Show Pass/Fail -> No
8 Tap right to select the Jitter. Make sure that
Number of Trials -> 1
Trial Dur. -> 120 sec
Show Pass/Fail -> No
9 Tap right to select the Frame Loss. Make sure
that
Test Procedure -> RFC 2544
Trial Dur. -> 60 sec
Test Granularity -> 10 Mbps
10 Next press the home key. Then select Restart.
11 Now select the Action key and then select Start
Traffic.
12 The RFC 2544 test will automatically run through
all of its tests and save results to the unit. A bar
at the top will diplay the minimum time
remaining for the test to be completed.
7