SMC Networks HRR010-A-10 Series Operation Manual page 88

HRX-OM-X084
Chapter 5 Display and Setting of Various Functions
Set value
OFF
WRN
Setting for electric conductivity rise alarm
9.
Press the [▼] key. Displays screen for setting value of electric conductivity rise alarm
threshold.
Displayed only when Option DM is selected [Electrical conductivity control function , DI
water (pure water) piping].
RUN
The user can change the threshold of "AL12
● Setting range ：0.4 to 46.0 µS/cm( Initial value ：45.0 µS/cm)
Setting of NOT TEMP READY alarm
10.
Press the [▼] key. Displays screen for changing the chiller behaviour when the NOT
TEMP READY alarm occurs.
RUN
The user can decide the chiller behaviour if alarm "AL13: NOT TEMP READY" occurs.
Set value
OFF
WRN
FLT
5.5 Advanced setting mode
5-36
Contents
Alarm is not generated.
Operation of this product will continue when the
alarm occurs.
El ectric conductivity rise alarm threshold
Operation at occurrence of NOT TEMP READY alarm
TEMP ⇒READY ⇒ ALARM( Alternately displayed )
Contents
Alarm is not generated.
Operation of this product will continue when the
alarm occurs.
Operation of this product will stop when the
alarm occurs.
."
electric conductivity rise
Initial value
―
○
unit
：µS/cm
Initial value
○
―
―
HRR Series