Technical Specifications - ResMed Mirage Micro User Manual

Technical Specifications

Note: The mask system does not contain latex, PVC or DEHP materials.
Pressure–Flow
Curve
Dead Space
Information
Standards
Therapy
Pressure
Resistance
Sound
Environmental
Conditions
Gross
dimensions
Note: The manufacturer reserves the right to change these specifications
without notice.
The mask contains passive venting that meets the
requirements for protection against rebreathing as specified in
ISO 17510-2. As a result of manufacturing variations, the vent
flow rate may vary.
50
45
40
35
30
25
20
15
10
5
0
4 6 8 10
Mask Pressure (cm H
The dead space of the mask varies according to cushion size. It
is  mL for the Extra Large size.
CE designation in accordance with EC directive 93/4/EEC,
class IIa. ISO 49, ISO 34, ISO 0993- and ISO 0-.
4 to 0 cm H O

Drop in pressure measured (nominal)
at 0 L/min: 0. cm H
at 00 L/min: 0. cm H
DECLARED DUAL -NUMBER NOISE EMISSION VALUES in
accordance with ISO 4. The A-weighted sound power level
of the mask is  dBA, with uncertainty 3 dBA. The A-weighted
sound pressure level of the mask at a distance of  m is
9 dBA, with uncertainty 3 dBA.
Operating temperature: +°C to +40°C
Operating humidity: 0%–9% relative humidity
non-condensing
Storage and transport: -0°C to +0°C
Storage and transport humidity: 0%–9% relative humidity
non-condensing
S: 40 mm (H) x 9 mm (W) x 93 mm (D)
M, L, LW, XL:  mm (H) x 9 mm (W) x 9 mm (D)
Mask fully assembled – no headgear.
12 14 16 18
O)

O

O


Pressure Flow
(cm H O) (L/min)
2
4 9
 
 34
 40
0 4
20