ResMed Mirage Micro User Manual page 8

Reassembling the Mask
1
Push the vent cover
onto the elbow. Make
sure both sides click into
place.
4
Push the forehead pads
firmly into the forehead
support.
23_Insert PortCaps
7
Insert the ports cap.
2
Insert the swivel into the
end of the elbow.
5
(a)
Insert the forehead
support (a) into the mask
frame and screw (b) the
dial clockwise onto the
pole. Turn the dial until
it clicks (c). Ensure the
dial sits flush against the
frame.
8
Reattach the top
headgear straps by
threading them through
the loops.

3
Insert the assembled
elbow into the mask
frame.
6
(b)
(c)
Insert the cushion into
the mask frame. Ensure
that the arrows at base
of the cushion and mask
frame are aligned.
9
Turn the dial until you
reach the setting that
gives you good comfort
and seal.