Micromeritics TriStar II 3020 Maintenance Instructions Manual page 36

Operational Verification
5. Click Replace all. The Open Script Test File dialog is displayed.
6. Select leakall.svt, then click
7. Click
Next
8. During the test, several messages will be displayed. Follow the instructions for each
message then press
Click
Next
Data will be inserted into the pane as collected.
9. After the test is finished, a dialog stating the test is complete is displayed.
10. Click
OK
11. When you close the test, a report is generated automatically to the screen.
32
.
OK
on the Service Test dialog to start the test.
. Take note of the amount of time each step of the test will take.
OK
; the second view of the Service Test dialog is displayed.
to close the dialog, then click
TriStar II 3020 Scheduled Maintenance Instructions
on the test dialog to close the test.
Close
Jun 09