Introduction; Required Supplies - Micromeritics TriStar II 3020 Maintenance Instructions Manual

Hide thumbs Also See for TriStar II 3020:

Table of Contents

TriStar II 3020 Scheduled Maintenance Instructions

Introduction

This document contains instructions for replacing parts that may wear during instrument oper-

ation and for calibrating the instrument. Replacing broken or contaminated parts is not part of

a Scheduled Maintenance. Repairs should be made before proceeding with the Scheduled

Maintenance and should be charged separately from the Scheduled Maintenance.

Tools required to perform a Scheduled Maintenance are listed in the following table. Any tool

used in the calibration of the instrument must be certified and have a sticker showing the cali-

bration date and the calibration due date. Also, a certificate for each tool must be on file. Some

customers will require the calibration certificates for each tool used in calibration and a signed

certificate that the instrument is working to original specifications.

Part Number

003-09622-00 or

003-09622-10

003-09601-10

003-09623-01

236-09800-00

Jun 09

Pressure Gauge/Crystal

Temperature Meter

Vacuum gauge (optional)

Calibration Chamber Assembly

Description

Introduction

Table of Contents

Do you have a question about the TriStar II 3020 and is the answer not in the manual?