Micromeritics TriStar II 3020 Maintenance Instructions Manual page 27

TriStar II 3020 Scheduled Maintenance Instructions
6. Remove the cover.
7. Select
8. Enter the temperature obtained using the calibration device, then click
9. Remove the temperature probe from the analyzer.
10. Reattach the top panel using the four screws removed in step 1. Insert each of the screws
and turn slightly. When all four screws are in place, tighten each with a screwdriver.
Jun 09
Unit [n] > Calibration > Temperature
from the main menu.
Calibration
.
OK
23