Micromeritics TriStar II 3020 Maintenance Instructions Manual page 29

TriStar II 3020 Scheduled Maintenance Instructions
6. Obtain a stand on which to place the Dewar. Place the Dewar on the stand so that the
calibration volume device is completed lowered into the Dewar.
7. Add crushed ice to submerge the calibration volume device. Do not add water or any
other liquid.
8. Evacuate the chamber for at least 20 minutes.
9. Select
10. Click
Measured
Jun 09
Unit [n] > Calibration > Manifold Volume
, then click
Next
from the main menu.
.
Calibration
25