INOXPA NL Installation, Service And Maintenance Instructions page 2

EC
DECLARATION OF CONFORMITY
(according to Directive 98/37/CE, annex II, part A)
Manufacturer:
Hereby declares, that the product:
VALVE
Name
conforms to the specifications of the Council Directive:
Machine Directive
Directive and Harmonised Standards:
UNE-EN ISO 12100-1/2:2004
UNE-EN 953:1997
UNE-EN ISO 13732-1:2007
Pressure Equipment Directive
manufactured in accordance with the requirements of the Directive.
Max operating P.: DN-25/1" to DN-100/4" = 10 bar
DN-25
Diameter:
Equipment category: SEP = Sound Engineering Practice, determined according to Article 3 Section
1.3.a, first paragraph Annex II, Table 6
This material SHALL NOT carry CE marking.
DN-25 < X < ó = DN-100
Diameter:
Equipment category: Category I, determined according Article 3 Section 1.3.a, first paragraph Annex
II, Table 6
This material SHALL carry CE marking.
Conformity Assessment Module: Module A
In compliance with the Regulations (CE) nº 1935/2004, relating to materials and articles intended to
come into contact with foodstuff (repeal Directive 89/109/CEE), the materials in contact with the product
do not transfer their components in quantities which may jeopardise consumer's health or safety.
Declaration of Incorporation
The equipments above mentioned won't put to operation till the machine into
or onto it will be installed must comply with the stipulations of the Machine
Directive.
Banyoles, November 2009
INOXPA, S.A
.
C/ Telers, 54
17820 Banyoles (Girona) - SPAIN
SINGLE SEAT – N/K/M
98/37/CE, and complies with the essential requirements of the
97/23/CE, the equipment has been designed and
(Directive 98/37/CE, annex II, part B):
www.sks-online.com
www.sks-webshop.com
Type
2009
Year of
manufacture