Panasonic KX-TVM50 Programming Manual page 129

Max. 16 digits consisting of 0–9,
Feature Guide References
2.3.23 Intercom Paging (APT/DPT Integration Only)
Fax Management
The VPS can be programmed to detect fax signals received on incoming calls and direct those calls
to an extension (fax machine) designated to handle faxes (Automatic Fax Transfer feature). A
maximum of 2 fax extensions can be programmed as the destination for faxes. If the main fax
extension is not available to receive a fax, the VPS will forward the fax transmission to the alternate
fax extension. Additionally, the fax manager can receive notification when new faxes have been
received.
Automatic Transfer of Incoming Fax Call
Enables or disables the Automatic Fax Transfer feature.
Note
• Automatic fax detection functions for 30 s after a call is received.
Value Range
Disable, Enable
Feature Guide References
2.3.20 Fax Management
Main Fax Extension No.
Specifies the extension number of the main fax machine.
Value Range
2–5 digits
Feature Guide References
2.3.20 Fax Management
Alternate Fax Extension No.
Specifies the extension number of the alternate fax machine. When the main fax extension is busy or
does not answer within the time specified under "Fax No Answer Time", the VPS forwards the fax call
to the alternate fax extension.
Value Range
2–5 digits
, # for each group
2.5 System Parameters
Programming Guide 129