Panasonic KX-TVM50 Programming Manual page 190

Remote Call Forward to CO
(Available with DPT Integration only.) Allows the System Administrator to programme Telephone
number 1 and Telephone number 2 as the destination to which the callers are forwarded when the
Remote Call Forwarding is set to a Trunk. This feature must be enabled in the Class of Service (COS)
setting to be utilised (see "Remote Call Forwarding Set").
Review
Plays back a message.
Rewind
Replays the last 4 s of a message.
Rotary Telephone
A telephone compatible of pulse dial only. Callers using a rotary telephone will be automatically
forwarded to an operator or the General Delivery Mailbox.
Service Group
A group which is specified parameters of call service for incoming calls. One of 8 call service groups
can be assigned to each VPS port and PBX trunk.
Service Mode
The System Administrator or the System Manager can change the call handling method programmed
for each Service Group 1–8.
Subscriber
A person who has an assigned mailbox.
Subscriber Tutorial
When a subscriber accesses his or her mailbox for the first time, he or she will be guided to set up
these items simply by following Help messages:
(1) Password
(2) Owner's Name
(3) Personal Greetings (No Answer Greeting/Busy Greeting/After Hours Greeting)
System Administration
System programming can be performed via 2 ways: (1) Locally (PC connected directly to the USB
port of the VPS or connected to the VPS via LAN), or (2) remotely (PC connected via the telephone
network and the internal modem card [optional] of the VPS).
Note: Local programming and remote programming are mutually exclusive.
190 Programming Guide