CTX PV722E Service Manual page 22

C T X
C T X
C T X
2.DVI input
Level 1
Detect Adj. Brightness
Detect Adj. Contrast
Detect Adj. Audio Mute
Volume
Color
Main Menu
Image
Position
Language
Reset
Source
3.7.5 Accessory OSD Indications
Signal out of range
No Signal Input and power
down
Level 2
Adjustment Scale
9300∘ K
6500∘ K
User
Moive
Smooth
OSD Position
English (select)
German (select)
French (select)
Spanish (select)
Italiano (select)
中文 (option)
Yes/No
DVI/VGA (select)
An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range.
When the signal cable is not plugged into PC or when the
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn't to detect H or V Sync
then show "No Signal Input" 3 sec, and then show " Power
down" message on screen 2 sec.
If first turn on the monitor, shows "No Signal Input" 30 sec.
-21-
Service Manual
Level 3
R/G/B select
Color
Tint
Flesh Tone
(Y) Brightness
(Y) Contrast
Reset
On/Off
H-Position
V-Position
Center
PV722i/PV722E
Level 4
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale