Configuring the Program
SCANNER BUTTON ASSIGNMENT
If you use the Scanshell 1000 scanner, clicking the 'Scanner button assignment' will open
the following window, allowing you to assign specific document category to each of the
scanner buttons.
To configure the Scanshell 1000 buttons:
Select a document type from the dropdown list of the desired scanner button. Note
that an arrow is marking the corresponding button in the picture.
Click OK.
Repeat the selection for the other buttons.
Note: The scanner button assignment option is available only if auto-detection is enabled.
IdScan User Manual version 9.0
Figure 30: Scanshell 1000 button configuration
©
Card Scanning Solutions, all rights reserved
Automation tab
57