CSSN ScanShell 1000 User Manual page 12

Scanshell 800The main screen controls
•
document types, according to the used scanner and application, and sets the
source for data detection accordingly.
•
state to be used for the OCR recognition template. You can also set state
detection to 'Auto Detect' (top of the list),
•
Rotate
to control the image orientation prior to saving.
•
Zoom
•
Otherwise, activates the
Note: Opening a file is possible only if a scanner is physically connected to the PC, or if the
license key used is a temporary key.
•
Scanner (ScanShell 800/800N/2000 or ScanShell 1000), Magnetic reader, or
an image file on the hard disk.
•
Scanner
connected to the PC. A red light indicates that no scanner was found.
•
way to control the image prior to saving.
•
SAVE AS dialog if file saving is enabled, or saves the file to the clipboard.
•
Toggle Image
output destination to file or clipboard.
•
•
verification purposes.
•
Open OCR
IdScan User Manual version 9.0
Category: Toggles between the available
Driver's license
Image: Rotates the image 90 degrees clockwise. This allows you
Image: Click to enlarge the image for better reading.
Scan Image: Starts the image scan if using manual scan.
File Open
Toggle Image
Connection: A green light indicates that the scanner is
Delete Image: Deletes the scanned image. This gives you a
Save to File: Active only in manual save mode: Opens the
Output: Active only in manual save mode: Sets the
Card Verification: Activates the verification function.
Toggle reference: Sets the reference source for card
View: Open extracted text view.
©
Card Scanning Solutions, all rights reserved
country: Sets the country and
dialog.
Source: Sets the input image source to
12