Program Operation; Card Insertion Auto-Detect; Category; Categories - CSSN ScanShell 1000 User Manual

Scanshell 800Program Operation

PROGRAM OPERATION

Before scanning, you have to set up the scanning configuration. This can be done in
two ways:
6. In the configuration panel, in which you can control all the program settings,
see chapter 7, Configuring the Program, page 55.
7. Most settings can also be set up from within the application main window.

CARD INSERTION AUTO-DETECT

Click on this button to for automatic detection of card insertion. If this button is
pressed, scanning will start as soon as you insert a card into the scanner. If auto-detect
is not turned on, scanning starts when you click the

CATEGORY

ScanShell 800support all document reading as follows:
• Driver Licenses
• Passports
• Business cards
• Barcodes
• Checks

Categories

• Combined category: Driver license/ID/Business card: In this mode,
ScanShell scans a document assuming that the document is a either a driver
license or an ID card. If it is indeed a driver license or an ID card, the process
shows the license details (and exports the data). If the document is not a driver
license or an ID card, ScanShell switches automatically to business card mode
and attempts to process the scanned card as a business card. The progress of
this process can be followed in the status bar at the bottom of the screen,
which also indicates whether the card is being processed as a driver license or
a business card.
Clicking the OCR button will open an appropriate window according to the
document type detected; driver license details for scanned driver licenses and
business card details if the scanned document was a business card.
Note: This option is only available if the United State (auto detection) option is selected in
the 'State' field!
IdScan User Manual version 9.0
Select the scanned document types, according to the used

Figure 2: status bar document type indication

©
Card Scanning Solutions, all rights reserved
button.
Scan Image
14