Editing And Deleting Custom Fields; Id Data Saving; Id Card Verification; To Verify A Card - CSSN ScanShell 1000 User Manual

Modular scanning application
Hide thumbs Also See for ScanShell 1000:
Table of Contents

Advertisement

Scanshell 800
• Click 'Add' and type in a name for the field.
• Repeat the process to create additional fields.
• Click OK. You will find new fields in the Custom fields' window. You can
now type values or data into the field.

Editing and deleting custom fields

Repeat the process above. After the 'Add' window opens, select a label and click 'Edit'
to change the field's name, or 'Remove' to remove it. When you are done, click OK.

ID DATA SAVING

Text data saving options are controlled from the configuration panel's Automation tab.
See Automation tab, page 56.

ID CARD VERIFICATION

Use this option to check if the card you are scanning is genuine. IdScan will scan the
data on the card using OCR, and then compare it to data from a second source on the
card, either the barcode or the magnetic strip (if available). If the data from the two
sources match, the card is genuine. Else, the card is either faked, or one of the data
sources on the card is corrupted.

TO VERIFY A CARD:

1. Select Record -> New Record from the menu bar or click on the New Record
button from tool bar.
2. The New Record Screen will appear.
3. Select a state from the State dropdown list or use the State Detect option (for
OCR). You are advised to select the state manually, because if the state is not
recognized for some reason, you'll have to repeat the process. You can also
select a state from the quick state selection buttons, if you have predefined
them. (To set a button for the desired state, right-click on the button. Select the
desired state from the list. After you release the mouse button, you'll notice
that the button name has been changed to the state you selected).
4. Use the popup menu of the card verification button to
select a second card data source, which will be used for
comparison with the OCR results. (Barcode by default.
The magnetic Reader will only be available if a
Magnetic reader is connected to the computer).
IdScan User Manual version 9.0
©
Card Scanning Solutions, all rights reserved
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scanshell 800n900Scanshell 800Idscan

Table of Contents