Scanshell 1000
•
Open Configuration
which all the application behavior can be set.
•
Exit / End of
image (used in automatic save mode only).
•
background saving progress (used in automatic save mode only).
•
Export
•
when State Auto Detect is selected.
SCANNER BUTTON ASSIGNMENT
Scanning using Scanshell 1000 can be initiated either by pressing
the
Scan Image
have been configured.
To configure the scanner buttons:
1. Click on the
2. Select the
3. Click on the
IdScan User Manual version 9.0
Dialog: Opens the configuration dialog screen in
Scan: Used to close the application or to save the current
Background Save Progress
FTP Progress
(Status bar): Shows the progress of FTP
Detected State
Device connection indicator
Red – device is not connected
Green – device is connected
button, or pressing the scanner buttons, after they
Configuration
Paper auto detection
Figure 9: Scanshell 1000 button assignment
Scanner button assignment
©
Card Scanning Solutions, all rights reserved
(Status bar): Shows the
(Status bar): Displays the detected state
button, and select the
box
button.
Scanner button assignment
tab.
Automation
24