Setting The Phone Line Type; Pabx And Transfer - Brother MFC MFC-5440CN User Manual

Setting the Phone Line Type

If you are connecting the MFC to a line that features a PABX (PBX),
ADSL or ISDN to send and receive faxes, it is also necessary to
change the Phone Line Type accordingly by completing the following
steps.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press

PABX and TRANSFER

The MFC is initially set to be connected with PSTN (Public Switched
Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX).
Your MFC can be connected to most types of PABX. The MFC's
recall feature supports timed break recall only (TBR). TBR will work
with most PABX systems allowing you to gain access to an outside
line, or transfer calls to another extension. The feature works when
Tel/R
the key is pressed.
You can program a
in a Speed-Dial location. When programming the Speed-Dial
Menu/Set 2
number (
displays "!"), then enter the telephone number. If you do this,
you do not need to press
a Speed-Dial location. (See Storing numbers for easy dialling on
page 5-1.)
0 5
, , .
to select PBX , ADSL , ISDN (or Normal ).
▼
.
.
Tel/R
keypress as part of a number stored
3 1
- - ) press
Tel/R
Tel/R
first (the screen
each time before you dial using
GETTING STARTED 2 - 3