General Setup; Setting The Mode Timer; Setting The Paper Type - Brother MFC MFC-5440CN User Manual

General Setup

Setting the Mode Timer

The MFC has three temporary mode keys on the control panel: Fax,
Scan and Copy. The PhotoCapture key (MFC-5840CN only) is also
a temporary mode key. You can change the number of seconds or
minutes that the MFC takes after the last Scan, Copy or
PhotoCapture operation before it returns to Fax mode. If you select
Off , the MFC stays in the mode you used last.
(MFC-5840CN only)
1
Menu/Set
Press
2
Press or
▲
0 Sec , 30 Secs , 1 Min , 2 Mins ,
5 Mins or Off .
Menu/Set
Press
3
Stop/Exit
Press

Setting the Paper Type

To get the best print quality, set the MFC for the type of paper you
are using.
1
Menu/Set
Press
2
Press or
▲
Inkjet , Glossy or
Transparency .
Menu/Set
Press
3
Stop/Exit
Press
■
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet
immediately to prevent smudging or paper jams.
■
(MFC-5840CN only)
You can only use plain paper in Tray#2.
2 - 4 GETTING STARTED
1 1
, , .
to select
▼
.
.
1 2
, , .
to select Plain ,
▼
.
.
General Setup
1.Mode Timer
General Setup
2.Paper Type