Setting the Tray Use for Fax mode
(MFC-5840CN only)
You can change the default tray that will be used for printing received
faxes.
1
Menu/Set
Press
2
Press
or
▲
Tray#1 Only , Tray#2 Only , or
Auto Select .
Menu/Set
Press
3
Stop/Exit
Press
■
Auto Select will allow your MFC to take paper from
Tray#1 first, or take from Tray#2 if:
• Tray#1 is out of paper.
• Tray#2 is set to a different paper size that is more suitable
for the received faxes.
• Both trays are using the same size paper and Tray#1 is not
set to use plain paper.
■
You can only use plain paper sizes Letter, Legal or A4 in
Tray#2.
1
9
,
,
.
to select
▼
.
.
General Setup
9.Tray Use:Fax
GETTING STARTED 2 - 9