2
Getting started
Initial Setup
Setting the Date and Time
When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.
1
Menu/Set
Press
2
Enter the last two digits of the year.
Menu/Set
Press
3
Enter two digits for the month.
Menu/Set
Press
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Menu/Set
Press
5
Enter the time in 24-Hour format.
Menu/Set
Press
6
Stop/Exit
Press
The LCD now shows the date and time whenever the MFC is in
Fax mode.
Setting Tone or Pulse dialling mode
(Except for the Nordic Countries)
1
Menu/Set
Press
2
Press
or
▲
Menu/Set
Press
3
Stop/Exit
Press
0
2
,
,
.
.
.
. (For example, enter 06 for 6th.)
. (For example, enter 15:25 for 3:25 P.M.)
.
0
4
,
,
.
to select Pulse (or Tone ).
▼
.
.
Initial Setup
2.Date/Time
GETTING STARTED 2 - 1