Verify Operations - Spectra Logic T950 Instructions Manual

Complete the Procedure
C
OMPLETE THE
Use the following instructions to reassemble the library.
Reinstall the Right Side Access Window Panel
1. Lift the panel and position the openings on the back of the panel on the
2. While holding the panel steady with one hand, slide the panel down
3. Use a 1/8-inch Allen wrench or hex screwdriver to install the screw at

Verify Operations

Perform the following test to confirm that the library is functioning
properly. The test takes approximately 10 minutes, after library
initialization.
1. Once the right side access panel is in place, verify the library and the
2. After the VAX column fully initializes, approximately 10-30 minutes,
3. Select Maintenance > Diagnostics. The Diagnostics screen displays.
4. Select All Motion Basic Tests. The screen refreshes to display
June 2013
P
ROCEDURE
hooks on the sides of the opening in the end of the frame (see
through Figure 5 on page
into place.
the bottom of the side panel.
VAX column re-initialize.
use the front panel to move any tape from one slot to another or from a
slot to a drive. Move the tape back to its original slot.
information about the selected diagnostic.
Figure 12 The All Motion Basic Tests Diagnostics screen.
VAX Bumper Replacement—Spectra T950 Library
Reinstall the Right Side Access Window Panel
6).
Figure 3
11