Spectra Logic T950 Instructions Manual page 6

Library

Hide thumbs Also See for T950:

Estimated Time to Complete

Remove the Right Side Access Window Panel

Use the following steps to remove the right side access panel from the

library.

1. Use a 1/8-inch Allen wrench or hex screwdriver to remove the screw at

2. While holding the panel steady, slide it up to disengage the panel from

3. Lift the panel off of the hangers, out and away from the frame.

4. Set the panel aside.

Figure 3 Remove the screw at the

bottom of the window panel.

June 2013

the bottom of the window panel.

the hangers on each side of the chassis (three per side).

Figure 4 Slide the panel

up to disengage the hangers.

VAX Bumper Replacement—Spectra T950 Library

Remove the Right Side Access Window Panel

Figure 5 Lift the panel out

and away from the frame.

Table of Contents